PENTING . IMPORTANT . 注意
KEPADA PELANGGAN YANG DIHORMATI,
SEBELUM MEMBUKA BUNGKUSAN SILA BUAT RAKAMAN VIDEO
BAGI TUJUAN TUNTUTAN KEROSAKAN DAN KEHILANGAN
SEBARANG TUNTUTAN TANPA RAKAMAN TIDAK AKAN DILAYAN.
SEGALA KERJASAMA AMATLAH DIHARGAI
DEAR VALUED CUSTOMER,
BEFORE UNBOXING THE PACKAGE PLEASE MAKE A
VIDEO RECORDING FOR FAULTY AND DAMAGE CLAIM PURPOSES
尊贵的顾客，请在打开包裹之前录制一段视频，
以确保产品损坏的情况有证据。未附带录制视频的索赔将无法受理。
谢谢您的合作
Thermal Grizzly Putty is an electrically non-conductive alternative to traditional thermal pads, specifically designed for GPU modifications and the replacement of thermal pads between the PCB and the cooler.
TG Putty is an electrically non-conductive alternative to conventional thermal pads. As an easy-to-apply and flexible gap filler, it compensates for height differences, making it ideal as a replacement for thermal pads on GPUs. Graphics cards typically feature several types of thermal pads of varying thicknesses from the factory, requiring different pads during replacement or when converting the cooler to a GPU water cooler.
The application of TG Putty is performed using the included spatulas, which also enable large-area application. TG Putty can compensate for height differences ranging from 0.2 mm to 3.0 mm.
TG Putty is available in three variants, primarily differing in their thermal conductivity:
● TG Putty Basic: Medium thermal conductivity
● TG Putty Advance: Good thermal conductivity
● TG Putty Pro: Excellent thermal conductivity
For modifying a single, smaller graphics card without an active backplate (e.g., GeForce GTX 1060), approximately one 30-gram container of TG Putty is required. For larger graphics cards, such as a GeForce RTX 4090, one 30-gram container is generally sufficient for the memory (VRAM) and voltage regulators (VRM) on the front side. On the backside, there is often a uniform, larger gap between the PCB and the backplate on larger graphics cards. In this case, approximately two 30-gram containers are needed to completely fill this gap.
Notes:
TG Putty is not suitable for use on processors (IHS or Direct Die) or directly on the GPU die!
Before application, the target surface should be thoroughly cleaned and degreased, for example, using TG Cleaning Wipes or conventional isopropanol.
Scope of Delivery
● Thermal Putty Basic / Advance
● 3x Spatulas
*Change Of Mind/I Do Not Want The Product Anymore/Return Policy Does NOT Apply For Order(s) & Product(s) Which Has Been Used, Unboxed, Unsealed, Tampered, Not Returned Along Full Documentation/Tax Invoice & Original Retail Box With Shipping Packing
*For Warranty Purposes, Please Refer Our Official Website T&C
